Fixing your plumbing at home is a great DIY project. It can save you a lot of money because you need not hire a master plumber.

However, while some problems can be fixed, DIY plumbing can turn into a disaster if you are not careful.

When working for your DIY project, you should also need to have some DIY plumber skills to be successful. Listed below are the DIY plumbers’ skills and knowledge that you need to attain to avoid unexpected troubles.

1. Knowing the shut-off location

One of the basic skills that you need to practice, especially for tasks that involve tightening of toilets is to know where the shut-off valves are. Shut-off valves are the safety valves used to close a line.Each of your water amenities in the house can have its specific shut-off valve.

femal_plumber

It is critical to turning them off before starting your DIY project, however, if you are unsure where the precise shut-off is located, you can turn off the main shut-off that is usually located in the place where the water line enters the house.

2. Sweating copper pipe

In the world of modern plumbing, this is one of the most important skills that you need to learn. Knowing how to sweat copper pipe is an essential skill required for small fixes and adding valves. To begin with, all you have to do is prepare a solder, flux, a small torch, and a few pieces of copper pipe.

Video by 24 hour Plumbers Sydney

In the process, you first need to clean the copper, add the flux, heat the joint, and apply the solder.

3. Planning a plumbing system

Knowledge of plumbing is the great asset that will help you map out your plumbing system in your house. Some of the important points in plumbing that you need to know for the home include the function of the pipe, a size of drain lines, and the size of pitch a waste pipe requirements.


A lot can go into making a house a home and while carpeting may be common in most houses as it is, an area rug brings a true touch of individuality to a space.

Maintenance of the two differs slightly and the correct application of these methods to clean a rug will also guarantee it remains in good condition for longer.

Similarly to cleaning carpeted areas, it is essential to first remove loose debris by shaking the rug outside before proceeding to vacuuming the area rug on both sides.

Regular Vacuuming of all area rugs will help the rug maintain the vibrancy of its colour and up-keep the quality of the fiber and material.

Depending on the care label on the specific area rug, you will be able to determine whether your area rug requires dry cleaning or can be spot-cleaned manually.

Some small area rugs may be machine-washable, however long fringing may cause tangling and loss of shape.

To effectively clean area rugs, you may want to choose the most appropriate cleaning product for your rug, which can easily be bought over-the-counter.

Rug cleaning London advise that to ensure your area rug is colorfast and will not be damaged by the product, test a small area first.

Proceed to applying the carpet-cleaning solution and rub according to directions given on the label.

rug-cleaning

Using rubber gloves and a brush with medium to hard bristles, rub in the product and let it sit for a few minutes before blotting with a wet cloth or softer bristle brush until you remove excess product completely.

Repeat this method on the rest of the rug and finish off by vacuuming the entire area rug to restore the fiber back to normal, letting it air-dry for as long as required, preferably placing larger rugs outdoors if possible.


Staining or soiling the carpet once in a while is inevitable. However, there are seven tricks that you can use to get rid of the stain.

The 7 Carpet Cleaning Tricks

1. Before you can clean the carpet, use a sponge to absorb any excess liquid to avoid spreading the stain. If it is a sticky substance like chocolate, scrape off what you can. Use water and soap in equal measure to scrub the area and rinse it using warm water.

2. Get rid of gum by using ice wrapped in a towel. Place it on the gum and then scrap it off.

3. For nail polish, use a piece of cloth dipped in clear acetone to blot it.

4. According to Carpet Cleaning North Las Vegas greasy foods are removed by scrapping off what you can and then place a paper towel over it. Use the iron over the towel to absorb the grease. A mixture of soap, vinegar, and water ensure your carpet is spotless.

5. cleaning of coffee and stains from most other foods is by blotting the stain and the cleaning with club soda.

Eco-Carpet-Spotter-Voorhies-Cleaning

6. Pet poops are removed by scraping what you can and rinsing with club soda.

7. Remove makeup by dampening the spot and rubbing it with dish soap.


We lock our doors but often fail to think about our garage door as a security vulnerability.

With a few simple tips, you can protect yourself and secure your garage door. Here is how:

1. Close your garage door.

It may seem obvious, but many times homeowners simply forget to close their doors or don’t think it is a big deal; it’s just a quick trip to the store after all. But it only takes a few minutes to be robbed. Make sure your door is closed at all times except for when in use. And be sure to teach this to others in your household.

Video – garage door repair Henderson NV

2. Don’t leave your door remote out in the open.

As illustrated in the true story above, a thief can break into your car and steal your remote control. Now they have access to your home. When you get out of your garage, take the remote control with you. At the very least, hide it in a more conspicuous place than the visor. This is especially important in big suburbs or cities, Boston or Las Vegas garage doors are particularly vulnerable to crime is typically higher. Though, as in the story illustrated above, even sleepy little towns are not immune.

3. Get a keychain remote.

keychain

Better than hiding your remote control, get one that is always with you. Most opener manufacturers sell keychain remotes that you can always take with you. For a less then $20 you can be sure you are not leaving yourself open and vulnerable to theft.

4. Use was rolling code technology.

Most older openers have security flaws in that anyone with a transceiver and some know how can park near your home and wait for you to use your remote control. When you do, they pick up the transmission and copy your code. Now they don’t need to steal your remote; they just made one of their own. Rolling code technology randomly selects a new code for your opener, that only it and the remote have. It is impossible for a thief to copy it.

5. Lock the door.

The door leading into your house from the garage should be automatically lock whenever closed. If for some reason a thief does get into your garage, this should be the next line of defense. You would not leave your front door open and unlocked for thieves, so why leave the door leading in from the garage


In deciding how the design your kitchen will be, you should give consideration to things like: will your home have an island? Should it be of a traditional or modern design? What types of appliances will you need in the new design? What type of lighting design?

1. Make your own sketch / or plan: Before you ask your designer / fitted kitchen specialists to create a 3D design of your new kitchen, make a sketch plan of your desired fitted kitchen. It doesn’t matter how good you are at drawing, it will help you to have all the important aspects that you wish to include noted down.

2. Consider your space; would an extension be the best option for you? Extensions can allow for more kitchen space or even an open plan kitchen / dining area.

There is always more than one way to layout a kitchen and so your kitchen modelling company like Wimbledon Kitchen Fitters should be able to provide informed advice on the optimum design for the space that you have.

3. Flooring; any kitchen can benefit hugely from new flooring. Wooden floors, laminate, vinyl and tiles are all options for the kitchen area. It should be planned in advance as it will have implications on plumbing and the like.

kitchen-fitter

Mistakes to Avoid

1.Going way over budget and space limits – Spending money makes most people tingle inside. There is nothing like buying exactly what you want. Unfortunately, sometimes in kitchen designs renovation projects, we simply want too much. That is why it is important that we thoroughly plan our projects and stick to one budget. Before you even begin renovations, you should have a detailed and budgeted list of your supplies, equipment, and furnishings as well as a blueprint (a sketch will do nicely) of how your new kitchen will appear. If you are replacing appliances, be sure your new fixtures can comfortably fit in their allotted locations. You will be very unhappy if you buy something that you cannot use, and if you cannot return it.

2.Having unrealistic ideas – If you do not know the difference between a hammer and a wrench, the odds of you, yourself, doing any fancy, kitchen designs reconstruction successfully are zero to none. Any tasks that involve coming into contact with electric and plumbing devices are intricate jobs and should be left to an expert. The additional cost for the labor should have already been included in your budget. Sure, it is cheaper to do it yourself, but can you enjoy your new kitchen from a hospital bed? Speaking of cost, what the hospital will charge you is probably a great deal more than the expense of hiring a trained professional.

3.Forgetting about the future – For a variety of reasons, most people move at least once every five years. Unless you are extremely comfortable financially, this means that before five years have the past, you will either be selling or renting the house in which you currently live. Keep that in mind when you are choosing your colors and features of your kitchen design renovation project. Sure, it is all about you now, but when it is time to sell or rent your house, it is all about someone else.